Pod Pro for iPhone & Apple Watch Pod Pro for iPhone & Apple Watch

Technology

$79.95
$79.95
+
-
Contact us for a quote on customization
Share:

The Nomad Pod Pro is a compact yet powerful 6000 mAh backup battery for iPhone and Apple Watch. It has an integrated 9" Apple Lightning cable and a cable-management and charging system for Apple Watch's magnetic charging cable.

2X full charges for both iPhone and Apple Watch

Pod Pro packs a compact high density 6000mAh lithium ion battery which is enough to charge your iPhone 6 and Apple Watch, twice each. Toss Pod in your pack, and you will have enough power to get through a long weekend.

No more messy wires

We built a 24cm Lightning cable for your iPhone into Pod Pro, so you don't need to carry an extra Lightning cable.

To install your Apple Watch cable inside Pod Pro. 
1. Twist Pod Pro’s aluminum top off to reveal USB port
2. Plug Apple Watch charging cable into USB port
3. Wrap cable around the body and secure Apple Watch charging puck
4. Place aluminum top on
 
Magnetic design

Pod Pro's anodized aluminum case snaps into place via two powerful magnets on either side, allowing for easy alignment and maintaining a tight grip. This design holds your Apple Watch cable inside, keeping everything clean and organized.

The integrated Lightning cable is also held into place by a hidden magnet hiding into Pod Pro when you don't need it, but ready when you are. We love the way this came out. Strong and reliable, while still being easy to use.

For the love of Apple

We built the Pod Pro to the highest standards. Pod Pro's integrated Lightning cable is MFi certified by Apple for compatibility and safe charging for iPhone or iPod.

FAQ:

#1: Does Pod Pro for Apple Watch come with a charging cable?

Pod Pro does have an integrated Apple Lightning connector to charge your iPhone. It also ships with a Micro USB cable to charge the Pod Pro itself from any standard USB type A port. Pod Pro for Apple Watch is intended to be used with the charging cable that comes with the Apple Watch and does not come with it's own cable for charging the Apple Watch.

#2: Does Pod Pro for Apple Watch work with both versions of the Apple Watch charging cable?

Yes, Pod Pro for Apple Watch works with both the 1m & 2m variations of the Apple Watch charging cable. It also works with both the plastic and metal version of the cable, though you need to use the included spacer with the metal charging puck.

#3: How long does Pod Pro for Apple Watch take to charge?

Pod Pro for Apple Watch uses pass through charging when plugged in, meaning it will charge the Watch first and then itself. The Pod itself takes roughly three hours to fully charge depending on the level of input. It's a big battery!

Specifications:

Pod Pro for Apple Watch
Size 98mm (diameter) x 29mm (height)
Weight 182g
Technical 6000 mAh high density lithium ion rechargeable battery, Micro USB (in), Apple Lightning (out), Type A USB (out)
Materials Precision stamped and anodized aluminum casing, polycarbonate plastic enclosure, Dupont Versollan TPE rubber base
Certification MFi, CE, FCC, ROHS, UN38.3
Charge Inputs Charges with Micro USB
Charge Outputs 5V / 2.1A out for Lightning cable - 5V / .5A out for USB port (for both 1m & 2m versions of Apple Watch magnetic charging cable)

The Nomad Pod Pro is a compact yet powerful 6000 mAh backup battery for iPhone and Apple Watch. It has an integrated 9" Apple Lightning cable and a cable-management and charging system for Apple Watch's magnetic charging cable.

2X full charges for both iPhone and Apple Watch

Pod Pro packs a compact high density 6000mAh lithium ion battery which is enough to charge your iPhone 6 and Apple Watch, twice each. Toss Pod in your pack, and you will have enough power to get through a long weekend.

No more messy wires

We built a 24cm Lightning cable for your iPhone into Pod Pro, so you don't need to carry an extra Lightning cable.

To install your Apple Watch cable inside Pod Pro. 
1. Twist Pod Pro’s aluminum top off to reveal USB port
2. Plug Apple Watch charging cable into USB port
3. Wrap cable around the body and secure Apple Watch charging puck
4. Place aluminum top on
 
Magnetic design

Pod Pro's anodized aluminum case snaps into place via two powerful magnets on either side, allowing for easy alignment and maintaining a tight grip. This design holds your Apple Watch cable inside, keeping everything clean and organized.

The integrated Lightning cable is also held into place by a hidden magnet hiding into Pod Pro when you don't need it, but ready when you are. We love the way this came out. Strong and reliable, while still being easy to use.

For the love of Apple

We built the Pod Pro to the highest standards. Pod Pro's integrated Lightning cable is MFi certified by Apple for compatibility and safe charging for iPhone or iPod.

FAQ:

#1: Does Pod Pro for Apple Watch come with a charging cable?

Pod Pro does have an integrated Apple Lightning connector to charge your iPhone. It also ships with a Micro USB cable to charge the Pod Pro itself from any standard USB type A port. Pod Pro for Apple Watch is intended to be used with the charging cable that comes with the Apple Watch and does not come with it's own cable for charging the Apple Watch.

#2: Does Pod Pro for Apple Watch work with both versions of the Apple Watch charging cable?

Yes, Pod Pro for Apple Watch works with both the 1m & 2m variations of the Apple Watch charging cable. It also works with both the plastic and metal version of the cable, though you need to use the included spacer with the metal charging puck.

#3: How long does Pod Pro for Apple Watch take to charge?

Pod Pro for Apple Watch uses pass through charging when plugged in, meaning it will charge the Watch first and then itself. The Pod itself takes roughly three hours to fully charge depending on the level of input. It's a big battery!

Specifications:

Pod Pro for Apple Watch
Size 98mm (diameter) x 29mm (height)
Weight 182g
Technical 6000 mAh high density lithium ion rechargeable battery, Micro USB (in), Apple Lightning (out), Type A USB (out)
Materials Precision stamped and anodized aluminum casing, polycarbonate plastic enclosure, Dupont Versollan TPE rubber base
Certification MFi, CE, FCC, ROHS, UN38.3
Charge Inputs Charges with Micro USB
Charge Outputs 5V / 2.1A out for Lightning cable - 5V / .5A out for USB port (for both 1m & 2m versions of Apple Watch magnetic charging cable)

Please see below for the different methods of decoration/imprint.

Keep in mind - not all methods are available on all products, and certain materials can only have certain printing methods applied to them. Below you will find a general guide to each method, but ultimately reference the product in question for the methods available.

Depending on the type of decoration you choose, you will need to upload a full-color logo, a one color logo, or a black/white logo. The following sections break out decoration types by the coloration of your logo required.

All logos must be uploaded in one of the following vector formats -.AI, PDF, or.EPS

 

--

Black/White Logo -

The following decoration methods require a black/white logo to be uploaded. There may be additional costs incurred if your artwork does not meet this specification and alteration is needed in order to make a black/white logo.

DEBOSSING

A machine heat presses a die of your artwork into the material leaving an impression of your artwork on the surface.

LASER ENGRAVING

A method by which light is used to burn an image into the material leaving a clean and polished finish. As each product is made of different materials, the laser engraved imprint appearance may vary by item. Laser Oxidation is offered on items where the surface color and the substrate are the same.

ETCH / DEEP ETCH

The technique of creating art on the surface of glass by applying acidic, caustic, or abrasive substances. The removal of minute amounts of glass causes the characteristic rough surface and translucent quality of frosted glass.

WOOD INLAY

A process in which a design is etched out of a piece of wood, and pieces of wood in contrasting color are laid into the etched surface to create a design or logo.

 

--

One Color Logo –

The following decoration methods require a one color logo to be uploaded. There may be additional costs incurred if your artwork does not meet this specification and alteration is needed in order to make a one color logo.

The color of the artwork uploaded will be closely PMS color matched. Additional costs may incur if a custom color is to be used. Your proof will verify color and accuracy before finalization of payment.

SILK SCREEN / SCREEN PRINT

Screen printing is the direct imprinting of a design onto the surface of a product. Ink is applied through a fine screen leaving a color imprint. One color of ink is included in the customization price. An additional set-up charge and run charge (per unit, based on quantity) will apply for each additional color, logo, or position.

PAD PRINT

An inked image is transferred from a photo-etched plate to a thick, soft silicone pad. The pad is then pressed against the product. The pad can wrap itself as much as 180° around a small object, and ink coverage is excellent.

 

--

Full-Color Logo –

The following decoration methods allows a full-color logo to be uploaded.

DIGITAL FULL COLOR (4C)

This method of printing uses 4-color process inks, Cyan (C), Magenta (M), Yellow (Y), and Black (K), to achieve a multi-colored design. The transparent inks are applied in a dot format that uses half-tones and the blending of colors to achieve a look with many colors, shading and fine details.

CHROMA-TEC

Application of a full-color image onto a surface using a digital printer.

UV PRINTING

UV printing is a form of digital printing that uses ultra-violet lights to dry or cure ink as it is printed. As the printer distributes ink on the surface of a material specially designed UV lights follow close behind, curing - or drying - the ink instantly.

EMBROIDERY / 3D EMBROIDERY

The art of decorating fabric or other materials with needle and thread or yarn. Embroidery is available for caps, bags, blankets, towels and clothing items in general. 3D Embroidery is identical in nature, but the design is raised from the product – available on some hats.

WOVEN LABEL

Woven labels are produced on a loom. Your logo/wording is woven into the piece of material. A printed label is different because your logo/wording is printed on top of the material rather than being woven into the material.

LEATHER APPLIQUE

Leather Applique is similar to embroidery as it uses stitching to apply a piece of leather that has a pressure-sensitive or glue backing to a garment to create depth in a logo or design. Available on some hats.

Please see below for the different methods of decoration/imprint.

Keep in mind - not all methods are available on all products, and certain materials can only have certain printing methods applied to them. Below you will find a general guide to each method, but ultimately reference the product in question for the methods available.

Depending on the type of decoration you choose, you will need to upload a full-color logo, a one color logo, or a black/white logo. The following sections break out decoration types by the coloration of your logo required.

All logos must be uploaded in one of the following vector formats -.AI, PDF, or.EPS

 

--

Black/White Logo -

The following decoration methods require a black/white logo to be uploaded. There may be additional costs incurred if your artwork does not meet this specification and alteration is needed in order to make a black/white logo.

DEBOSSING

A machine heat presses a die of your artwork into the material leaving an impression of your artwork on the surface.

LASER ENGRAVING

A method by which light is used to burn an image into the material leaving a clean and polished finish. As each product is made of different materials, the laser engraved imprint appearance may vary by item. Laser Oxidation is offered on items where the surface color and the substrate are the same.

ETCH / DEEP ETCH

The technique of creating art on the surface of glass by applying acidic, caustic, or abrasive substances. The removal of minute amounts of glass causes the characteristic rough surface and translucent quality of frosted glass.

WOOD INLAY

A process in which a design is etched out of a piece of wood, and pieces of wood in contrasting color are laid into the etched surface to create a design or logo.

 

--

One Color Logo –

The following decoration methods require a one color logo to be uploaded. There may be additional costs incurred if your artwork does not meet this specification and alteration is needed in order to make a one color logo.

The color of the artwork uploaded will be closely PMS color matched. Additional costs may incur if a custom color is to be used. Your proof will verify color and accuracy before finalization of payment.

SILK SCREEN / SCREEN PRINT

Screen printing is the direct imprinting of a design onto the surface of a product. Ink is applied through a fine screen leaving a color imprint. One color of ink is included in the customization price. An additional set-up charge and run charge (per unit, based on quantity) will apply for each additional color, logo, or position.

PAD PRINT

An inked image is transferred from a photo-etched plate to a thick, soft silicone pad. The pad is then pressed against the product. The pad can wrap itself as much as 180° around a small object, and ink coverage is excellent.

 

--

Full-Color Logo –

The following decoration methods allows a full-color logo to be uploaded.

DIGITAL FULL COLOR (4C)

This method of printing uses 4-color process inks, Cyan (C), Magenta (M), Yellow (Y), and Black (K), to achieve a multi-colored design. The transparent inks are applied in a dot format that uses half-tones and the blending of colors to achieve a look with many colors, shading and fine details.

CHROMA-TEC

Application of a full-color image onto a surface using a digital printer.

UV PRINTING

UV printing is a form of digital printing that uses ultra-violet lights to dry or cure ink as it is printed. As the printer distributes ink on the surface of a material specially designed UV lights follow close behind, curing - or drying - the ink instantly.

EMBROIDERY / 3D EMBROIDERY

The art of decorating fabric or other materials with needle and thread or yarn. Embroidery is available for caps, bags, blankets, towels and clothing items in general. 3D Embroidery is identical in nature, but the design is raised from the product – available on some hats.

WOVEN LABEL

Woven labels are produced on a loom. Your logo/wording is woven into the piece of material. A printed label is different because your logo/wording is printed on top of the material rather than being woven into the material.

LEATHER APPLIQUE

Leather Applique is similar to embroidery as it uses stitching to apply a piece of leather that has a pressure-sensitive or glue backing to a garment to create depth in a logo or design. Available on some hats.