A pack that adapts to your ever-changing gear, lifestyle and environment, the Everyday Backpack was created by a team of designers, engineers, and photographers to meet the needs of creative, adventurous people. Unrivaled accessibility, expandability, and organization. The patented MagLatch provides lighting fast top access, with dual side-loading via two weatherproof side zips. Huge external carry capacity made possible by a versatile tuck-away strap system and 2 expandable external side pockets. Integrated luggage carry makes this bag equally suited for daily commutes and extended travel. Endlessly configurable FlexFold dividers keep photo or everyday gear organized, protected, and not bunched at the bottom of your bag. Internally padded accessory pockets keep small items in check. Dedicated sleeve for up to 15” laptop, tablet, and documents. Ultra clean aesthetic, all-custom hardware, minimal dangling straps.
Everyday Carry, Perfected:
A completely new, unique divider system keeps everything you carry organized, protected, and accessible, instead of in a pile at the bottom of your bag.
FOR CAMERAS, OR NOT
The Everyday Backpack is designed to not only meet the carry needs of photographers, but also travelers, commuters, adventurers, and everyone in-between.
Intelligent Internal Organization:
3 FlexFold Dividers allow for endless internal configuration, compartmentalizing, and gear stacking, and prevent gear from falling to the floor of your bag.
INNER SIDE PANEL POCKETS
Protective pockets for batteries, cards, hard drives, memory banks, and other small items.
LAPTOP AND TABLET SLEEVES
Dedicated, protected laptop pocket with tablet/document sleeve is accessible without opening main bag compartment. See SPECS tab for max laptop dimensions.
HOLDS YOUR COMPLETE KIT
Our most voluminous bags yet, both 20L and 30L versions carry a very complete pro photography setup. See SPECS tab for specific carry capacities.
TOP SLIP POCKET
A magnetically sealed pocket just beneath the top flap conceals high value items like wallet, phone, and travel documents.
A Peak Design Anchor key tether sits within one of the outer side pockets for quick access to keys and IDs.
Revolutionary Closure System:
DUAL SIDE ACCESS
ACTIVE SIDE ACCESS
STRAPS THAT HUG YOU
PAT. PENDING STERNUM STRAP
TUCK-AWAY WAIST STRAP
Built To Protect:
Weatherproof 500D Kodra shell with high-density padding is DWR impregnated and poly-coated twice on both sides. Premium weatherproof exterior zippers.
PREMIUM MATERIALS AND BUILD
Hypalon-reinforced and bar-tacked stress points. Soft, durable mixed-cotton twill interior for protection, durability and a luxurious feel. The Ash backpacks replace Hypalon touchpoints with natural NuBuck leather. All-custom anodized aluminum hardware.
Ultralight waxed Kodra synthetic canvas with DWR coating for weatherproofness, poly-spun mixed twill interior, compression-molded high-density EVA foam dividers and protective panels, die-cast and stamped anodized aluminum hardware with sandblasted finish and protective clear coat. Charcoal bags have Hypalon touchpoints, Ash bags have natural leather touchpoints.
Please see below for the different methods of decoration/imprint.
Keep in mind - not all methods are available on all products, and certain materials can only have certain printing methods applied to them. Below you will find a general guide to each method, but ultimately reference the product in question for the methods available.
Depending on the type of decoration you choose, you will need to upload a full-color logo, a one color logo, or a black/white logo. The following sections break out decoration types by the coloration of your logo required.
All logos must be uploaded in one of the following vector formats - .AI, .PDF, or .EPS
Black/White Logo -
The following decoration methods require a black/white logo to be uploaded. There may be additional costs incurred if your artwork does not meet this specification and alteration is needed in order to make a black/white logo.
A machine heat presses a die of your artwork into the material leaving an impression of your artwork on the surface.
A method by which light is used to burn an image into the material leaving a clean and polished finish. As each product is made of different materials, the laser engraved imprint appearance may vary by item. Laser Oxidation is offered on items where the surface color and the substrate are the same.
ETCH / DEEP ETCH
The technique of creating art on the surface of glass by applying acidic, caustic, or abrasive substances. The removal of minute amounts of glass causes the characteristic rough surface and translucent quality of frosted glass.
A process in which a design is etched out of a piece of wood, and pieces of wood in contrasting color are laid into the etched surface to create a design or logo.
One Color Logo –
The following decoration methods require a one color logo to be uploaded. There may be additional costs incurred if your artwork does not meet this specification and alteration is needed in order to make a one color logo.
The color of the artwork uploaded will be closely PMS color matched. Additional costs may incur if a custom color is to be used. Your proof will verify color and accuracy before finalization of payment.
SILK SCREEN / SCREEN PRINT
Screen printing is the direct imprinting of a design onto the surface of a product. Ink is applied through a fine screen leaving a color imprint. One color of ink is included in the customization price. An additional set-up charge and run charge (per unit, based on quantity) will apply for each additional color, logo, or position.
An inked image is transferred from a photo-etched plate to a thick, soft silicone pad. The pad is then pressed against the product. The pad can wrap itself as much as 180° around a small object, and ink coverage is excellent.
Full-Color Logo –
The following decoration methods allows a full-color logo to be uploaded.
DIGITAL FULL COLOR (4C)
This method of printing uses 4-color process inks, Cyan (C), Magenta (M), Yellow (Y), and Black (K), to achieve a multi-colored design. The transparent inks are applied in a dot format that uses half-tones and the blending of colors to achieve a look with many colors, shading and fine details.
Application of a full-color image onto a surface using a digital printer.
UV printing is a form of digital printing that uses ultra-violet lights to dry or cure ink as it is printed. As the printer distributes ink on the surface of a material specially designed UV lights follow close behind, curing - or drying - the ink instantly.
EMBROIDERY / 3D EMBROIDERY
The art of decorating fabric or other materials with needle and thread or yarn. Embroidery is available for caps, bags, blankets, towels and clothing items in general. 3D Embroidery is identical in nature, but the design is raised from the product – available on some hats.
Woven labels are produced on a loom. Your logo/wording is woven into the piece of material. A printed label is different because your logo/wording is printed on top of the material rather than being woven into the material.
Leather Applique is similar to embroidery as it uses stitching to apply a piece of leather that has a pressure-sensitive or glue backing to a garment to create depth in a logo or design. Available on some hats.