Allmade Unisex Tri-Blend Crewneck T-Shirt
Product Type Clothing
Interested in customizing this product, or bulk orders? There may be additional discounts based on quantity. Contact us for a custom quote by using the contact button below.
Feel your impact in this crazy-soft sustainable tee that uses an equivalent of up to 6 recycled plastic water bottles. All yarn is spun, knit, fabric dyed and finished in the U.S.A.
Features:
- 4.2-ounce, 50% Repreve® polyester from recycled plastic bottles/25% organic, US-grown cotton/25% Tencel™ Modal, 30 singles
- 25% Repreve® polyester from recycled plastic bottles/25% black polyester/25% organic, US-grown cotton/25% Tencel™ Modal (Aluminum Grey, Vino Red)
- 1x1 rib knit neck
- Shoulder to shoulder taping
- Side seams
- Tear-Away label
Two billion t-shirts are made every year, using fibers like industrial cotton, which is often grown in regions with minimal regulations—directly exposing workers and the environment to deadly pesticides and herbicides that are outlawed in the U.S.
These materials are then transported across the globe using bunker fuel, a heavy oil residue so toxic most countries won’t let ships using it within 200 miles of shore.
They are then spun into yarn, knitted into fabric, and sewn into garments by workers, often in sweatshop conditions, for a wage that does not allow them to meet even their most basic needs. In countries like Haiti this translates to an increase in orphans, many of whom’s parents were forced to give them up because they couldn’t afford to care for them.
At Allmade, we’ve decided it’s time to make it better.
A better t-shirt starts with better raw materials. Our tri-blend shirts are made from organic US-grown cotton, recycled polyester, and TENCEL™ Modal– three fibers that not only produce a luxuriously soft shirt, but are better for the environment as well.
Find out more about Allmade here.
Please see below for the different methods of decoration/imprint.
Keep in mind - not all methods are available on all products, and certain materials can only have certain printing methods applied to them. Below you will find a general guide to each method, but ultimately reference the product in question for the methods available.
Depending on the type of decoration you choose, you will need to upload a full-color logo, a one color logo, or a black/white logo. The following sections break out decoration types by the coloration of your logo required.
All logos must be uploaded in one of the following vector formats - .AI, .PDF, or .EPS
--
Black/White Logo -
The following decoration methods require a black/white logo to be uploaded. There may be additional costs incurred if your artwork does not meet this specification and alteration is needed in order to make a black/white logo.
DEBOSSING
A machine heat presses a die of your artwork into the material leaving an impression of your artwork on the surface.
LASER ENGRAVING
A method by which light is used to burn an image into the material leaving a clean and polished finish. As each product is made of different materials, the laser engraved imprint appearance may vary by item. Laser Oxidation is offered on items where the surface color and the substrate are the same.
ETCH / DEEP ETCH
The technique of creating art on the surface of glass by applying acidic, caustic, or abrasive substances. The removal of minute amounts of glass causes the characteristic rough surface and translucent quality of frosted glass.
WOOD INLAY
A process in which a design is etched out of a piece of wood, and pieces of wood in contrasting color are laid into the etched surface to create a design or logo.
--
One Color Logo –
The following decoration methods require a one color logo to be uploaded. There may be additional costs incurred if your artwork does not meet this specification and alteration is needed in order to make a one color logo.
The color of the artwork uploaded will be closely PMS color matched. Additional costs may incur if a custom color is to be used. Your proof will verify color and accuracy before finalization of payment.
SILK SCREEN / SCREEN PRINT
Screen printing is the direct imprinting of a design onto the surface of a product. Ink is applied through a fine screen leaving a color imprint. One color of ink is included in the customization price. An additional set-up charge and run charge (per unit, based on quantity) will apply for each additional color, logo, or position.
PAD PRINT
An inked image is transferred from a photo-etched plate to a thick, soft silicone pad. The pad is then pressed against the product. The pad can wrap itself as much as 180° around a small object, and ink coverage is excellent.
--
Full-Color Logo –
The following decoration methods allows a full-color logo to be uploaded.
DIGITAL FULL COLOR (4C)
This method of printing uses 4-color process inks, Cyan (C), Magenta (M), Yellow (Y), and Black (K), to achieve a multi-colored design. The transparent inks are applied in a dot format that uses half-tones and the blending of colors to achieve a look with many colors, shading and fine details.
CHROMA-TEC
Application of a full-color image onto a surface using a digital printer.
UV PRINTING
UV printing is a form of digital printing that uses ultra-violet lights to dry or cure ink as it is printed. As the printer distributes ink on the surface of a material specially designed UV lights follow close behind, curing - or drying - the ink instantly.
EMBROIDERY / 3D EMBROIDERY
The art of decorating fabric or other materials with needle and thread or yarn. Embroidery is available for caps, bags, blankets, towels and clothing items in general. 3D Embroidery is identical in nature, but the design is raised from the product – available on some hats.
WOVEN LABEL
Woven labels are produced on a loom. Your logo/wording is woven into the piece of material. A printed label is different because your logo/wording is printed on top of the material rather than being woven into the material.
LEATHER APPLIQUE
Leather Applique is similar to embroidery as it uses stitching to apply a piece of leather that has a pressure-sensitive or glue backing to a garment to create depth in a logo or design. Available on some hats.
